Observer Based Slip Measurement Technique of DC Motor Mounted on Railway Wheel-set

Shahzor Memon, Riaz Uddin, Imtiaz Hussain Kalwar, Kamran Kazi

Abstract


The paper proposes the technique of detection and estimation of slip by using parameters of motor such as torque and current for a locomotive system. The motor is used for controlling wheel-set motion mounted on each axle of the rail. As the track condition changes (due to decrease in adhesion/friction), the parameter of motor considerably varies resulting slip occurrence. By utilizing inertial mounted sensors (such as tachometer) in order to measure the velocity of the train, slip can be detected. Furthermore, the estimation of motor parameters is carried out using Kalman filter, which minimizes the usage of additional sensors. In this regard, the proposed method offers a cost effective, accurate and robust solution for the slip issue in order to avoid accidents in locomotive systems. The technique is validated using simulation results in this paper.

Full Text:

PDF HTML

References


I. Hussain, Mei T.X, R. T.Richings, “Estimation of wheel–rail contact conditions and adhesion using the multiple model approach” International Journal of vehicle System Dynamics, vol. 55,no. 1, 2013.

Mei T.X, I. Hussain, “Detection of wheel-Rail Contact condition for improved traction control” proceeding of 4th international conference on railway traction system, Birmingham, UK, 2010.

I. Hussain, I. A. Halepoto, W. Kumar, K. Kazi, ”Anti-slip Traction Control of Railway Vehicle Based on Estimated wheel-rail Contact Condition” Sindh Univ. Res. Journal,vol. 45. No. 2, pp. 373-378, 2013.

P.A.Adewuyi, “DC Motor Speed Control” International Journal of multidisciplinary Sciences and Engineering, vol.4, no.4, May2013.

Ward, Christopher P., et al. "Adhesion estimation at the wheel–rail interface using advanced model-based filtering." Vehicle System Dynamics, vol. 50, no.12, 2012.

C.P ward, R.M. Goodall and R. Dixon “Detection of low adhesion in railway vehicles wheel/rail interface: assessment of multi-bodied simulation data” UKACC International Conference on control UK,3-5 September 2012

C.P Ward, R.M Goodall, R.Dixon and G.Charles “Use of real time creep force estimation data for assessment of low adhesion in wheel/ rail contact” 2011.

N. Fahmedha, P.Chaitanya, P.Anand and RachanaR“Estimation of System Parameters Using Kalman Filter and Extended Kalman Filter”International Journal of Advanced Technology and Engineering Exploration, vol. 2, no. 6, May-2015.

J H Yu, T X Mei, D A Wilson “Re-Adhesion control based on Wheel-Rail dynamics in railway traction system”UKACC International Conference on control, 2012.


Refbacks

  • There are currently no refbacks.


Copyright (c) 2017 Shahzor Memon



ISSN-E: 2523-1235, ISSN-P: 2521-5582

 Copyright © University of Sindh, Jamshoro. 2017 All Rights Reserved.  
Printing and Publication by: Sindh University Press. 


Journal Office, Institute of Information and Communication Technology, 
University of Sindh, Jamshoro, Sindh, Pakistan. 76080